Remediation of alpha-methylnaphthalene-contaminated sediments using peroxy acid

Laboratory experiments have been conducted to elucidate the degradation of alpha-methylnaphthalene in lake sediments using an advanced oxidation process (AOP) employing peroxy-acids as oxidizing agents. Abiotic degradation of alpha-methylnaphthalene was observed in sediment samples exposed to a 1:1:1 v/v/v mixture of water/organic acid/hydrogen peroxide solution. Sediment samples were collected from Lake Macatawa (Holland, MI) and ranged in total organic carbon content from 2.1% (sandy sediment sample III) to 12.8% (silty-clay sediment sample I) and surface area, which ranged from 3.2m(2)/g (sandy sediment sample III) to 22.0m(2)/g (silty-clay sediment sample I). Analytical measurements performed by gas chromatography revealed varied rates of degradation, depending on the type of acid and the characteristics of the sediment sample. Within 24h, alpha-methylnaphthalene was reduced to 70% and 100% of its original concentration when propionic acid and acetic acid were used as the organic acids, respectively. The formation of products was explored using a gas chromatograph equipped with a mass spectrometer and indicated mainly the formation of lower molecular weight compounds, such as alkyl chains. This AOP method of PAH degradation in sediment/liquid slurry was fast acting and products were most likely biodegradable.     

Human peroxisomal disorders

Peroxisomes are single membrane-bound cell organelles performing numerous metabolic functions. The present article aims to give an overview of our current knowledge about inherited peroxisomal disorders in which these organelles are lacking or one or more of their functions are impaired. They are multiorgan disorders and the nervous system is implicated in most. After a summary of the historical names and categories, each having distinct symptoms and prognosis, microscopic pathology is reviewed in detail. Data from the literature are added to experience in the authors' laboratory with 167 liver biopsy and autopsy samples from peroxisomal patients, and with a smaller number of chorion samples for prenatal diagnosis, adrenal-, kidney-, and brain samples. Various light and electron microscopic methods are used including enzyme- and immunocytochemistry, polarizing microscopy, and morphometry. Together with other laboratory investigations and clinical data, this approach continues to contribute to the diagnosis and further characterization of peroxisomal disorders, and the discovery of novel variants. When liver specimens are examined, three main groups including 9 novel variants (33 patients) are distinguished: (1) absence or (2) presence of peroxisomes, and (3) mosaic distribution of cells with and without peroxisomes (10 patients). Renal microcysts, polarizing trilamellar inclusions, and insoluble lipid in macrophages in liver, adrenal cortex, brain, and in interstitial cells of kidney are also valuable for classification. On a genetic basis, complementation of fibroblasts has classified peroxisome biogenesis disorders into 12 complementation groups. Peroxisome biogenesis genes (PEX), knock-out-mice, and induction of redundant genes are briefly reviewed, including some recent results with 4-phenylbutyrate. Finally, regulation of peroxisome expression during development and in cell cultures, and by physiological factors is discussed.     

Environmental behavior of the chiral acetamide pesticide metalaxyl: enantioselective degradation and chiral stability in soil

Racemic metalaxyl is currently being replaced in many countries by metalaxyl-M, the fungicide enantiomerically enriched with the biologically active R-enantiomer. This "chiral switch" is expected to reduce the amount of pesticide released into the environment as well as potential side-effects on nontarget organisms. Detailed knowledge of the environmental behavior of such chiral compounds should include information on the chiral stability (interconversion of enantiomers). In the present study, the degradation/ dissipation of metalaxyl and its primary carboxylic acid metabolite (MX-acid) in soil was investigated under laboratory conditions using enantioselective gas chromatography mass spectrometry (GC-MS). Racemic and the enantiopure R- and S-compounds were incubated in separate experiments. The degradation of metalaxyl was shown to be enantioselective with the fungicidally active R-enantiomer being faster degraded than the inactive S-enantiomer, resulting in residues enriched with S-metalaxyl when the racemic compound was incubated. The relatively high enantioselectivity suggests that degradation/dissipation was largely biological. The data indicated a conversion of 40-50% of metalaxyl to MX-acid, and the remaining metalaxyl being degraded via other pathways. The degradation of MX-acid was also enantioselective. Metalaxyl and MX-acid were both configurationally stable in soil, showing no interconversion of R- to S-enantiomers, and vice-versa. Furthermore, the conversion of metalaxyl to MX-acid proceeded with retention of configuration. Degradation followed approximate first-order kinetics but showed significant lag phases.     

Prediction of Temperature Profiles in Tumors and Surrounding Normal Tissues During Magnetic Induction Heating

The development and preliminary verification of a simple two-compartment model describing the thermal response of adjacent normal and cancerous tissues subjected to magnetic induction heating is presented. Analytical expressions were found for estimating the spatial temperature distributions in the system composed of a spherical tumor mass imbedded in a cylindrical normal tissue as a function of the field intensity and the tissue's physical, geometrical, and physiological characteristics. The conditions leading to preferential heating of the tumor are described.     

Melting behavior of polypropylene fibers studied by differential scanning calorimetry

Polypropylene fibers produced in a compact-spinning process were studied by differential scanning calorimetry (DSC). With unrestrained fibers, the onset of melting increases with decreasing draw ratio, increasing M_w/M_n, decreasing extrusion temperature, increasing annealing ratio, and increasing draw-down ratio. These trends are discussed in terms of restraints and reorganization. The onset of melting is shifted to lower temperatures as the heating rate increases for all combinations of material and processing parameters, indicating suppressed reorganization. At low draw ratios, the height and width of the endotherm are affected by the spinline stress, and a secondary peak or shoulder is observed on the high temperature side of the main peak. The magnitude of the secondary peak increases with decreasing M_w/M_n, increasing draw ratio, decreasing draw-down ratio, and decreasing heating rate, but its position mainly depends on the heating rate. This indicates that the secondary peak may be due to the melting of structures that have been reorganized during the heating scan. As the draw ratio increases, the melting regime broadens, especially towards lower temperatures, and several maxima emerge on the DSC curve. Reorganization and shrinkage during heating may explain these observations. © 1995 John Wiley & Sons, Inc.     

Non-destructive examination of the bonding interface in DEMO divertor fingers

Plasma facing components (PFCs) with tungsten (W) armor materials for DEMO divertor require a high heat flux removal capability (at least 10 MW/m² in steady-state conditions). The reference divertor PFC concept is a finger with a tungsten tile as a protection and sacrificial layer brazed to a thimble made of tungsten alloy W – 1% La₂O₃ (WL10). Defects may be located at the W thimble to W tile interface. As the number of fingers is considerable (>250,000), it is then a major issue to develop a reliable control procedure in order to control with a non-destructive examination the fabrication processes. The feasibility for detecting defect with infrared thermography SATIR test bed is presented. SATIR is based on the heat transient method and is used as an inspection tool in order to assess component heat transfer capability. SATIR tests were performed on fingers integrating or not the complex He cooling system (steel cartridge with jet holes). Millimeter size artificial defects were manufactured and their detectability was evaluated. Results of this study demonstrate that the SATIR method can be considered as a relevant non-destructive technique examination for the defect detection of DEMO divertor fingers.     

Understanding of the annealing temperature impact on ion implanted bifacial n‐type solar cells to reach 20.3% efficiency

Ion implantation has the advantage of being a unidirectional doping technique. Unlike gaseous diffusion, this characteristic highlights strong possibilities to simplify solar cell process flows. The use of ion implantation doping for n‐type PERT bifacial solar cells is a promising process, but mainly if it goes with a unique co‐annealing step to activate both dopants and to grow a SiO₂ passivation layer. To develop this process and our SONIA cells, we studied the impact of the annealing temperature and that of the passivation layers on the electrical quality of the implanted B‐emitter and P‐BSF. A high annealing temperature (above 1000 °C) was necessary to fully activate the boron atoms and to anneal the implantation damages. Low J_0BSF (BSF contribution to the saturation current density) of 180 fA/cm² was reached at this high temperature with the best SiO₂ passivation layer. An average efficiency of 19.7% was reached using this simplified process flow (“co‐anneal process”) on large area (239 cm²) Cz solar cells. The efficiency was limited by a low FF, probably due to contaminations by metallization pastes. Improved performances were achieved in the case of a “separated anneals” process where the P‐BSF is activated at a lower temperature range. An average efficiency of 20.2% was obtained in this case, with a 20.3% certified cell. Copyright © 2014 John Wiley & Sons, Ltd.     

Conjugated linoleic acid and chromium lower body weight and visceral fat mass in high-fat-diet-fed mice

More than half of the U.S. population has a body mass index of 25 kg/m² or more, which classifies them as overweight or obese. Obesity is often associated with comorbidities such as diabetes, cardiovascular diseases, and cancer. CLA and chromium have emerged as major dietary supplements that reduce body weight and fat mass, and increase basal metabolic rate in animal models. However, studies show that CLA induces insulin resistance in mice and in humans, whereas Cr improves insulin sensitivity. Hence, we designed the present study to examine the combined effect of CLA and Cr on body composition and insulin sensitivity in a Balb/c mice (n=10/group) model of high-fat-diet-induced obesity. CLA alone lowered body weight, total body fat mass, and visceral fat mass, the last of which decreased further with the combination of CLA and Cr. This effect was accompanied by decreased serum leptin levels in CLA-fed and CLA+Cr-fed mice, and by higher energy expenditure (EE) and oxygen consumption (OC) in CLA+Cr-fed mice. Serum levels of glucose, insulin, the pro-inflammatory cytokines, tumor necrosis factor-α (TNF-α), and interleukin-6 (IL-6), as well as insulin resistance index (IRI), decreased with CLA, whereas CLA and Cr in combination had significant effects on insulin and IL-6 concentrations and IRI. In summary, CLA+Cr decreased body weight and fat mass in high-fat-diet-fed mice, which may be associated with decreased leptin levels and higher EE and OC.